Tanning bed lamps are located in each sun bed or suntan lamp in the shops. When you are purchasing a new or especially a used tanning bed, make a careful examination of the bulbs. Make sure that they are proper tanning bulbs and meet the FDA guidelines with regard to health and safety. You should also estimate how difficult it is to get at the lamps. Be sure that the bulbs are not difficult to change when needed. It is quite important, and a lot cheaper, if you can carry out such routine maintenance yourself, if you buy a home tanning bed.

There are two completely different kinds of bulbs used in low pressure and high pressure beds. Ensure you buy the right tanning bed bulbs for your sun bed, because you cannot use any bulbs you like. If you are purchasing replacement bulbs on the Internet, check the make and model of your existing bed carefully. Make sure that the lamps you are buying are suitable for your bed.

High Pressure Sunbed Bulbs: high pressure beds use quartz lamps in a variety of sizes. The gases used in these bulbs are pressurized to slightly higher than atmospheric pressure. The lamps in these beds are located in the hood of the bed, so that you tan from above only. When you have tanned the skin on one side of your body for about 10-12 minutes, you turn over and tan the other side. The flat bed of these devices is much more comfortable than a conventional sun bed.

The biggest advantage of these bulbs is the amount of time you have to spend on the tanning bed. Since you tan more quickly, you need to spend less time in the salon, which means it works out cheaper. You can get the level of tan you want in about three weeks of three to five sessions each week. However, with a conventional bed, it would take you at least a month to achieve the same depth of colour. Maintaining your tan is a lot easier too. You only need two or three sessions each month to maintain the colour, compared with four times that many sessions on a conventional bed. Many of these bulbs produce UVA rays only, not UVB rays which are responsible for burning.

Conventional Sun Bed Lamps: Conventional, or low pressure beds use long tube lamps that resemble normal fluorescent tubes. The lamps are situated in the top and the bottom of the sun bed, which means that all the body parts are tanned at the together, without needing to roll over during the tanning session.

Low pressure beds use UVA and UVB rays in varying mixes. Some use both rays and others emit mostly UVA with some UVB rays. UVA rays are responsible for the (premature) ageing effects on the skin and UVB rays are the burning rays that cause skin burn when you are outside in the sun. It is very important to discover which kind of rays your tan bed’s bulbs emit. You must ensure you replace your existing bulbs with the same new lamps after about 1,000 hours of use.

Something else to think about when selecting the type of bed you use at home or in the salon, is the tanning bed lotion you will use. Different lotions suit different sorts of beds. The staff at your tanning salon will be able to help you select a lotion that will work for the bed you are using and your skin type. Regardless of the bed you use, you ought to definitely always use a lotion or a cream, because they will nourish your skin and help you get a Hollywood tan more quickly.

Related posts:

1. California Tan Tanning Lotion There are a variety of benefits to California Tan tanning...
2. Anti-Aging Face Lotion: A Wide Selection To Select From There's surely lots of variety with regards to choosing the...
3. The Importance Associated with Skin Cream for Smooth, Clear Skin Keep in mind if you had been young, and had...
4. Diastolic And Systolic Blood Pressure Levels The real order that the numbers involved in a blood...
5. Treat Yourself With Comfy And Elegant Contemporary Beds Modern times call for a more contemporary approach to living,...

Tags: acne, beauty, equipment, family, fitness, health, holiday, home improvement, other, self improvement, skin cancer, skin care, tanning, tanning beds, Uncategorized

You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.